emBoot"s MBA for Realtek is client-based firmware that allows a client PC to do a "network boot” using the NIC or LAN-On-Motherboard. MBA for Realtek is fully compliant with the Intel Wired for Management PXE spec. * Simple means of desktop OS deployment/disaster recovery * No need to change PC or NIC-specific settings * No need to enable bootROM on the NIC * No need to make network boot the highest pripriority boot device within the BIOS

emBoot"s MBA for Realtek is client-based firmware that allows a client PC to do a "network boot” using the NIC or LAN-On-Motherboard. MBA for Realtek is fully compliant with the Intel Wired for Management PXE spec. * Simple means of desktop OS deployment/disaster recovery * No need to change PC or NIC-specific settings * No need to enable bootROM on the NIC * No need to make network boot the highest pripriority boot device within the BIOS * Ideal for quickly installing guest operating systems using WfM-enabled desktop tools such as emBoot NBT or Altiris RDP * Bootable floppy functions as a PXE Boot ROM * Comes with MBADISK.EXE to build and configure bootable floppy "bootROMs" * MBAoD for Realtek supports additional boot protocols and individual options: - Remote Program Load (RPL) - Netware NCP/IPX - Traditional” BOOTP and DHCP * Supports SMC 1211TX Accton EN1209D-TX5, Allied Telesyn AT-2500, Compaq PCI 10/100, AcerOpen AON-325, Surecom EP-320X-R, plus others from: D-Link, Cameo, Edimax, Ovislink, CNet * Compatibility: 8100B, 8139, 8139C, 8139C+, 8139D based chipsets / ASICs from Realtek * Supports Disk on Module and Compact Flash, Dynamic UNDI Binding, PXESDS enabled